Welcome to Shenzhen Grande Electronic Co., Ltd.!

Shenzhen Grande Electronic Linkedin Page

E-mail us for a Quote:
sales88@greattong.com

Call us now:
+86-755-83261869

What is the difference between an inductive load and a capacitive load?

2019-07-23

Inductive load: Allowing current to flow, and it can store energy in the inductor. The current lags behind the voltage; Capacitive load: Preventing current from flowing, and it can also store energy in the capacitor. The current is ahead of the voltage

What is the function of resistors in the PCB board?

2019-07-23

Resistance is the most used component in all electronic circuits and whose main physical characteristic that is the conversion of electrical energy to thermal energy. It can also be said to be an energy-consuming component on account of generating heat af

What is the ball grid array (BGA) in printed circuit boards (PCBs)?

2019-07-22

BGA (Ball Grid Array) is a type of surface mount component packaging which is used for integrated circuit; And many functional chips adopt BGA such a packaging like CPU, DDR, ARM, DSP, FPGA, CPLD, etc.

What is the function of capacitors in circuits?

2019-07-22

You know, the basic function of the capacitor that is “blocking DC current but passing AC current”, which is why the capacitor is usually used in the circuit to separate DC current and let the AC current signal pass. Thus, capacitors, in the filter circui

What is the difference among PCB, IC, OP AMP and chip?

2019-07-20

1. Operational amplifier (OP AMP ) is a circuit unit with a pretty high amplification factor, a building block for analog circuits like comparators, summing and difference amplifiers, filters, integrators, differentiators, and which has special operationa

What is a PCB prototype?

2019-07-19

PCB prototyping is to manufacture a real circuit board from a designed PCB. And the main intention of prototyping is to not only test the concept and functionality of the design, but also perfect and grow it stage by stage, limiting final fabrication fail

How can I make PCB small in a size (layout approach)?

2019-07-19

In fact, what we should do that is ensuring the components layout is reasonable and compact, and the routing channel is fully utilized, which is also the minimum difference between a veteran and a newbie.

What is difference between relay and sensor while both are sensing devices?

2019-07-18

A relay is an electrically operated switch. And relay is used where it is necessary to control a circuit by a separate low-power signal, or where several circuits must be controlled by one signal. A sensor is a device, module, or subsystem whose purpos

What is the difference between zero PCB and general purpose PCB?

2019-07-18

Zero PCB is used for experimentation (cannot be mass-produced or sold to the users). And bonding wires are available except there is no specific circuit connection; General purpose PCB means a finished circuit board with a certain electrical connection

Why do electronics use so many resistors?

2019-07-17

As you probably know, the resistor is mainly used to limit current, shunt voltage, shunt current, generate heat, and be level shorting;

First - Previous -45 464748 49 50 51 52 53 54 - Next - End

Home About Us Services Quality Pb-Free News Contact Us

Copyright ® 2017,Shenzhen Grande Electronic Co., Ltd. All Rights Reserved. English 中文站 Sitemap